Marble quarry Diamond Wire could be widely used for all kinds of Marble quarrying and for Marble block squaring.
Advantage of Diamond Wire for Marble quarry:
The diamond wire quarrying technique can highly improve the marble quarrying efficiency, reduce the waste of stone resource, and can quarrying large blocks. At the same time, it can be operated safely and it is good for environment protection.
The main specialties of diamond wire are as follows:
1. Could be used for great area granite quarrying and get the regular blocks.
2. To get high percentage of forming large blocks, low waste of stone resource.
3. High production efficiency
4 .Safety operation, low- noise, low- dust and friendly surroundings
5. Low quarrying cost.
| 一、pecification and Performance parameters of Marble quarry Diamond Wire: |
| MODEL NUMBER |
SPECIFICATION |
BEADS/M |
FIXED BY |
| SW115M1R37 |
Φ11.5 |
37 |
RUBBER |
| SW115M1R40 |
Φ11.5 |
40 |
RUBBER |
| SW110M1R37 |
Φ11.0 |
37 |
RUBBER |
| SW110M1R40 |
Φ11.0 |
40 |
RUBBER |
| SW105M1R37 |
Φ10.5 |
37 |
RUBBER |
| |
|
|
|
|
| 二、Marble type and Cutting Performance： |
| CUTTING MATERIAL |
LINE SPEED |
CUTTING SPEED |
WIRE LIFE |
| Low rigidity Marble |
35-40 |
9-12 |
40-70 |
| Mid-rigidity Marble |
28-35 |
6-10 |
25-45 |
| Hard Marble |
25-30 |
4-8 |
20-30 |
| |
|
|
|
|
| 三、Diamond Beads and Specifications : |
| Specification |
Dia (mm) |
Working Layer (mm) |
Base ring length (mm) |
Manufacture Tech |
| SB115M1 |
Φ11.5 |
6.4 |
10 |
SINTERED |
| SB110M1 |
Φ11.0 |
6.0/6.4 |
9.5/10 |
SINTERED |
| SB105M1 |
Φ10.5 |
6.4 |
10 |
SINTERED |
| |
|
|
|
|
Remark: Can provide different support designs and sizes beads according to the stone material.
Other specification are available upon customers’ requirements. |
